Osmo Beton Olie

This transparent oil- and wax-based Osmo Concrete Oil is ideal for treating all types of indoor concrete, including artificial stone, screed, natural stone, and unglazed tiles. This Concrete Oil is particularly suitable for wall cladding, kitchen and bathroom floors, as well as tabletops, windowsills, and countertops. Osmo Concrete Oil dries to a semi-matte finish. After treatment, the product doesn't form a film on the surface. This means it doesn't form a thick layer, but instead penetrates the surface. Impregnated with Osmo Concrete Oil, the surface becomes water- and dirt-repellent and stain-resistant. After treatment, dust from concrete floors and other surfaces is significantly reduced. Treating concrete with Osmo Concrete Oil provides lasting protection for countertops, kitchen countertops, sinks, washbasins, and kitchen furniture, among other things. Do you want to treat concrete, terracotta, or stone outdoors? Then use Osmo Stone and Terracotta Oil.

Suitability for Concrete Oil

Oils enhance the natural color of the surface (permanent wet look). Testing is essential, as the oil reacts differently on each surface. White or very light-colored surfaces may turn slightly yellow as a result of the oil treatment. The acid sensitivity of the stone (e.g., marble) remains unaffected. Non-absorbent surfaces, such as glass, glazed tiles, or ceramic, cannot be treated (impregnated). Substrates that are sensitive to solvents (e.g., plastics like plexiglass) must be protected.

Available sizes: 0.75L and 2.5L 1L is approximately sufficient for one coat of 50m².

Note: Wash cloths saturated with the liquid product immediately after use or store them in an airtight container in a metal container (risk of spontaneous combustion). Once dry, the cloths can be disposed of in the trash.