
Description
Osmo Hardener 6632 for Hardwax Oil Express
Special hardener for adding to Hardwax Oil Express. Adding the hardener shortens the product's drying time. Thanks to the hardener, the Hardwax Oil dries within 1 to 2 hours. This 0.15L hardener is just enough for adding to a 2.5L can of Hardwax Oil Express. If you want to use less Hardwax Oil Express, add 6% of the hardener to the product. The pot life after adding the hardener is 90 minutes. After adding the hardener to the Hardwax Oil, you should not store it for longer than 90 minutes.
Instructions for Use Osmo Hardener 6632
Open the bottle containing the hardener and add it to the Osmo Hardwax Oil Express, emptying the bottle completely (15ml is just enough for a 2.5L can). Stir the products thoroughly for at least 2 minutes. Apply the Osmo Hardwax-Oil Express as directed.
Hardener Drying Time
The drying time of the Hardwax-Oil in combination with the Hardener is 1 to 2 hours at the correct temperature (23°C and 50% humidity). Lower temperatures or higher humidity may increase the drying time.
Note: The 0.15L Hardener is just enough for the 2.5L Hardwax-Oil Express. If you want to use less Hardwax-Oil, add 6% of the Hardener to the product. The pot life after adding the Hardener is 90 minutes. The Hardener can only be used in combination with the Hardwax-Oil Express; it cannot be used with other products.
Application
Application instructions for the Osmo Verharder 6632 0,15L
Application
Specifications
Location
Indoors
Surfaces
Floor
Wood type
Oak, Spruce, Pine, Acacia, Beech, Maple, Ash, Smoked oak, Wenge, Jatoba, Garapa, Birch
What customers think of the Verharder 6632 0,15L
This is it

Osmo Verharder 6632 0,15L
25
,
95
Want to know more about our Verharder 6632 0,15L?
Are you looking for a tutorial or do you have a technical question?
DIY help needed?
find a step-by-step guide for your project in our tutorial overview

