Removing grease stains from a wooden table

A grease stain on a wooden table often occurs because the protective layer has worn off and oil has soaked into the wood. With Intensiefreiniger and a new protective layer of Osmo Onderhoudsolie, you remove the stain and prevent stains from forming again.

Products in this knowledge item;

What to use for a grease stain on a wooden table?

Are you struggling with a grease stain on your wooden table? Chances are your wooden table's protection is no longer sufficient. If you have an oiled table, it is possible to remove the stain without sanding. After removing the stain, it is important to maintain the table. We therefore recommend the Renovatie Bundel in combination with the Osmo White and Green Pads.

The Renovatie Bundel contains the Osmo Intensiefreiniger. With the Osmo Intensiefreiniger, you can remove the grease stain from the wooden table. To prevent (grease) stains afterwards, we recommend polishing a layer of Osmo Onderhoudsolie. Below, we have a clear step-by-step plan on how to remove the grease stain from your table and then oil it.

Do you also have a black stain on your table in addition to a grease stain? Then also read how to remove black stains from your table. Besides grease stains, the Intensiefreiniger can also remove rings or water stains from your table.

Benefits of Intensiefreiniger

Very powerful cleaner
High yield, 1L = cleans 100m2
Easy to use
Removes ingrained dirt from the wood

How do you remove a grease stain from a wooden table?

Ensure the table is clean of dust or coarse dirt before you begin. Next, you can start cleaning the stain:

Start by preparing the cleaning agent. Depending on the severity of the stain, dilute the Intensiefreiniger 1:20 or 1:10 with lukewarm water. The less you dilute the agent, the stronger the effect.
Apply using the Hand Cleaning Set. This contains a Hand Pad Holder and a Green Pad. We recommend scrubbing the entire table thoroughly with the Green Pad.
Remove the loosened dirt with a damp cloth. Ensure the cleaning agent is completely removed before proceeding to the next step.
After successful drying, treat the cleaned surface with Osmo Onderhoudsolie.