
Osmo Terrace Oil
For ipe decking. Choose a dark wood tone or clear. Wood-toned oil for decks, boardwalks and garden furniture
32
,
95
From
Outdoor · wood type
The best Osmo finishes for ipe outdoors
The best way to treat ipe outdoors is with Osmo Terras-Olie, optionally with Antislip Terras-Olie 430 as a top coat, because ipe is so dense that it barely absorbs moisture, but for the same reason it also barely holds on to oil, which calls for periodic thin touch-ups rather than one thick coat.
Excellent
3633 reviews on Trustpilot
Fast delivery
Products

For ipe decking. Choose a dark wood tone or clear. Wood-toned oil for decks, boardwalks and garden furniture
32
,
95
From

Clear or in a light wood tone, with UV filter. Transparent protection for cladding, frames and fences
14
,
95
From















You have viewed 3 of 17 products
Project helper
Tell us what you are treating and how it should look. We choose the product, work out how much you need and put the complete plan together.
A few questions · about two minutes · no account needed
Or start right away: What do you want to do?

In these videos you will see how to oil decking, how to clean the wood and how to apply Osmo Terras-Olie.



Further reading
Outdoor
Every wood type and every surface has its own page with its own advice, so everything is two clicks away.
Finish ipe outdoors with Osmo Terras-Olie, and on a terrace that can become slippery with Osmo Antislip Terras-Olie 430 as a top coat. Ipe is one of the hardest and densest decking species. It hardly absorbs any moisture, but for the same reason it holds little oil. Touching it up thinly from time to time works better than one thick coat.
Terras-Olie protects against water and dirt. The pigmented versions also protect against UV light and keep the dark colour for longer; tints such as 014 Massaranduba or 016 Bankirai donker suit ipe. The clear 007 Teakolie offers no protection against UV. Always test a colour with a sample first.
Apply the oil thinly and wipe off whatever has not soaked in after a few minutes. Too much oil stays on the surface and becomes tacky. For grip, apply Antislip Terras-Olie 430 as a third coat over two coats of Terras-Olie; never directly on bare wood. For stairs, also take a look at outdoor stairs.
Let new ipe weather for at least six weeks and then remove the grey. If the wood has already turned grey, first treat it with Power-Gel. Read more about dense hardwood in hardwood oil. One litre of Terras-Olie covers about 24 m² per coat. Rinse used cloths with water afterwards, because cloths with oil on them can catch fire spontaneously.
Clean the terrace periodically with Terrasreiniger in the mop water and brush along the grain. Never use a pressure washer, because it damages the wood. When renovating, apply no more than one thin coat. Also take a look at terrace and cumaru outdoors.
Looking for DIY advice or have a technical question?