
Osmo UV-Protection Oil
Choose 424 Spruce, 429 Natural or clear. On bare softwood, apply WR 4001 first against blue stain. Transparent protection for cladding, frames and fences
14
,
95
From
Outdoor · wood type
The best Osmo finishes for spruce outdoors
The best way to treat spruce outdoors is with Osmo Landhuisverf or UV-Beschermingsolie, because pressure-treated spruce remains sensitive to moisture at damaged edges, and an exterior oil gives those vulnerable spots extra protection.
Excellent
3633 reviews on Trustpilot
Fast delivery
Products

Choose 424 Spruce, 429 Natural or clear. On bare softwood, apply WR 4001 first against blue stain. Transparent protection for cladding, frames and fences
14
,
95
From

A dense, even colour that does not peel. Also over old paint. Opaque paint for cladding, fences and sheds
44
,
95
From






Clear base coat that protects exterior wood against fungi
31
,
95
From












You have viewed 3 of 20 products
Project helper
Tell us what you are treating and how it should look. We choose the product, work out how much you need and put the complete plan together.
A few questions · about two minutes · no account needed
Or start right away: What do you want to do?

Colours on spruce
Real colour samples on spruce, per product line.
Every photo is a real colour sample. Order a sample to see the colour on your wood: every board is different.
In these videos you will see how to stain the wood with Natuurlijke Olie-Beits, how to paint the wood with an opaque finish using Landhuisverf and how to apply Osmo Landhuisverf.



Further reading
Outdoor
Every wood type and every surface has its own page with its own advice, so everything is two clicks away.
Finish spruce outdoors with Osmo Landhuisverf, Natuurlijke Olie-Beits or UV-Beschermingsolie. Outdoors, spruce is usually preservative treated, but it remains sensitive to moisture at damaged edges and sawn edges. A good finish protects those vulnerable spots and gives the wood the colour you want.
Landhuisverf is an opaque oil-based paint for fences, garden sheds, window frames and carports. The wood structure stays visible and the paint does not flake or crack. You can touch it up without sanding, over the old coat. There are 21 colours, which you can also mix. Also take a look at fence and shed.
Natuurlijke Olie-Beits is a primer and top coat in one and suitable for all exterior wood; apply two coats. For a grey look there is, for example, 906 Parelgrijs. On vertical wood you can also use UV-Beschermingsolie, with 424 Spar as the colour coat, which keeps spruce light in colour, followed by a coat of 420 clear.
Let new wood weather for at least six weeks and then clean it. Give sawn edges and end grain extra attention. Rough wood absorbs more product than planed wood. Always test a colour with a sample first. One litre of Landhuisverf or Natuurlijke Olie-Beits covers about 26 m² per coat. Rinse used cloths with water afterwards, because cloths with oil on them can catch fire spontaneously.
Clean a fence with Terrasreiniger and never use a pressure washer. Remove the grey from weathered wood first with Power-Gel. For spruce indoors, take a look at spruce indoors, and for a similar wood species at pine outdoors. If you deliberately want a silver-grey look, Vergrijzingsbeits gives an even grey colour straight away.
Looking for DIY advice or have a technical question?