
Osmo UV-Protection Oil
Choose 425 Oak or 432 Light oak for cladding, fence or gate. Transparent protection for cladding, frames and fences
14
,
95
From
Outdoor · wood type
The best Osmo finishes for oak outdoors
The best way to treat oak outdoors is with Osmo UV-Beschermingsolie or Natuurlijke Olie-Beits, because outdoors oak can turn black on contact with iron-rich water, and a well-sealing exterior oil limits that discolouration.
Excellent
3633 reviews on Trustpilot
Fast delivery
Products

Choose 425 Oak or 432 Light oak for cladding, fence or gate. Transparent protection for cladding, frames and fences
14
,
95
From

Choose 021 Bog oak or clear for oak decking. Wood-toned oil for decks, boardwalks and garden furniture
32
,
95
From
















You have viewed 3 of 18 products
Project helper
Tell us what you are treating and how it should look. We choose the product, work out how much you need and put the complete plan together.
A few questions · about two minutes · no account needed
Or start right away: What do you want to do?

In these videos you will see how to protect the wood with UV-Beschermingsolie, how to stain garden furniture and how to stain the wood with Natuurlijke Olie-Beits.



Further reading
Outdoor
Every wood type and every surface has its own page with its own advice, so everything is two clicks away.
Finish oak outdoors with Osmo UV-Beschermingsolie or Natuurlijke Olie-Beits on facades, gates and fences, with Natuurlijke Olie-Beits or Terras-Olie on garden furniture, and with Osmo Terras-Olie on terraces. Oak contains tannins. In contact with iron and moisture it can turn black, and a well-sealed finish limits this.
For an oak facade or gate, choose UV-Beschermingsolie. The colours 425 Eiken and 432 Eiken licht are designed to keep oak light in colour; first apply a coloured coat, followed by a coat of 420 clear. Natuurlijke Olie-Beits is also suitable, for example in 706 Eiken or 732 Eiken licht, in two coats. A pigmented colour protects better against greying than a clear one. Also see facade cladding.
UV-Beschermingsolie is not suitable for horizontal surfaces. So treat an oak terrace with Terras-Olie, for example in 021 Moeraseik. For a garden table or bench, choose Natuurlijke Olie-Beits, or Terras-Olie. Also see garden furniture.
Use stainless steel screws and fittings, so that no iron comes into contact with the wet wood. Also treat the end grain and sawn edges. First remove the grey from weathered oak with Power-Gel, and let new wood weather for at least six weeks. Read more in treating oak. One litre of UV-Beschermingsolie covers about 18 m² per coat, and one litre of Natuurlijke Olie-Beits about 26 m². Rinse used cloths with water afterwards, because cloths with oil on them can self-ignite.
Clean treated oak with Terrasreiniger and never use a pressure washer. When renovating, apply no more than one coat. For oak indoors, see oak indoors, and for a comparable wood species, see chestnut outdoors. On previously treated wood, always test on an inconspicuous spot first.
Looking for DIY advice or have a technical question?