
Osmo UV-Protection Oil
Clear or in a light wood tone, with UV filter: the wood keeps its own colour for longer. Transparent protection for cladding, frames and fences
14
,
95
From
Outdoor · wood type
The best Osmo finishes for fraké outdoors
The best way to treat fraké outdoors is with Osmo UV-Beschermingsolie, because fraké is more susceptible to mould than most tropical hardwoods, and a protective oil limits that risk.
Excellent
3633 reviews on Trustpilot
Fast delivery
Products

Clear or in a light wood tone, with UV filter: the wood keeps its own colour for longer. Transparent protection for cladding, frames and fences
14
,
95
From

A dense, even colour that does not peel. Also over old paint. Opaque paint for cladding, fences and sheds
44
,
95
From














You have viewed 3 of 16 products
Project helper
Tell us what you are treating and how it should look. We choose the product, work out how much you need and put the complete plan together.
A few questions · about two minutes · no account needed
Or start right away: What do you want to do?

In these videos you will see how to protect the wood with UV-Beschermingsolie, how to apply Osmo Landhuisverf and which Osmo product suits which exterior wood.



Further reading
Outdoor
Every wood type and every surface has its own page with its own advice, so everything is two clicks away.
Finish fraké outdoors with Osmo UV-Beschermingsolie, or with Natuurlijke Olie-Beits or Landhuisverf if you want more colour. Fraké is a light, yellowish brown wood species that is more prone to mould outdoors than most tropical hardwoods. A good finish protects the wood against weather, moisture and greying.
For a fraké facade or fence, choose UV-Beschermingsolie. Apply two coats: first a coat with colour and then a coat of 420 clear, or two coats of 420. On light wood, 429 Natural keeps the light colour. The oil is made for vertical wood and not for terraces. Also take a look at facade cladding and fence.
Natuurlijke Olie-Beits is a primer and top coat in one and suitable for all exterior wood. The pigmented versions protect against UV; the clear 701 does not. For an opaque colour that leaves the wood structure visible, choose Landhuisverf. Read more in fence stain.
Make sure the wood can dry properly after rain and does not stand directly on the ground. Also treat the sawn edges and the back. If the wood already has green deposits or has turned grey, first remove the grey and clean it with Power-Gel. Let new wood weather for at least six weeks. One litre of UV-Beschermingsolie covers about 18 m² per coat.
Clean treated wood with Terrasreiniger, which also removes algae and mould. Never use a pressure washer. When renovating, apply no more than one new coat. On previously treated wood, always test first on an inconspicuous spot.
Looking for DIY advice or have a technical question?