Skip to main content

Outdoor · surface

Finishing a canopy outdoors

The best Osmo finishes for your outdoor canopy

The best way to finish your outdoor canopy is with Osmo UV-Beschermingsolie or Natuurlijke Olie-Beits, because on a canopy, water drains off along the edges, so those edges absorb moisture faster than the middle of the roof surface.

Douglas fir canopy in a modern garden

Products

Everything for canopy outdoor

You have viewed 3 of 10 products

Project helper

Canopy: what does your project need?

Tell us what you are treating and how it should look. We choose the product, work out how much you need and put the complete plan together.

I'd rather choose myself

A few questions · about two minutes · no account needed

Or start right away: What do you want to do?

Douglas fir canopy in a modern garden

Colours

How UV-Protection Oil looks on your wood

Choose your wood and see the real colour sample.

Every photo is a real colour sample. Order a sample to see the colour on your wood: every board is different.

How to get it done

In these videos you will see how to apply Osmo Landhuisverf, how to stain the wood with Natuurlijke Olie-Beits and how to paint fascia boards.

Osmo Landhuisverf aanbrengen

Osmo Landhuisverf aanbrengen

Schutting beitsen: hoe beits ik een schutting?

Schutting beitsen: hoe beits ik een schutting?

Boeidelen schilderen: hoe verf ik boeidelen?

Boeidelen schilderen: hoe verf ik boeidelen?

Frequently asked questions

Oil and stain for a wooden canopy

Finish a wooden canopy with Osmo UV-Beschermingsolie on the posts and with Osmo Natuurlijke Olie-Beits on the beams and other parts where water can collect. A canopy stands outdoors all year round and is exposed to sun, rain and wind. The edges and tops of the beams in particular absorb moisture quickly.

UV-Beschermingsolie for vertical wood

UV-Beschermingsolie is made for vertical wood and protects against UV light by a factor of 12 compared with untreated wood. Apply two coats: a coloured coat followed by a coat of 420 clear, or two coats of 420. The oil is not suitable for horizontal surfaces, where water stands for longer.

Natuurlijke Olie-Beits for beams

Natuurlijke Olie-Beits is a primer and top coat in one and suitable for all exterior wood, including horizontal beams. Apply two coats. Pigmented colours protect against UV, the clear 701 does not. If you want to finish the whole canopy with one product, Natuurlijke Olie-Beits is the simplest choice. Also see pergola and carport.

Preparation

Preferably treat the wood before you assemble the canopy, so you can reach everywhere, including joints and end grain. Let new wood weather for at least six weeks. One litre of UV-Beschermingsolie covers about 18 m² per coat, and one litre of Natuurlijke Olie-Beits about 26 m². Rinse used cloths with water afterwards, as cloths soaked in oil can self-ignite.

Maintenance

Check the tops of the beams and the base of the posts every spring. Clean with Terrasreiniger and never use a pressure washer. First remove the greying from greyed wood with Power-Gel.

We're happy to help

Looking for DIY advice or have a technical question?

Need DIY help?

Find your project and read the step-by-step guide.

Technical question?

Get advice from a technical specialist.