
Osmo Terrace Oil
For azobe decking. Choose a matching wood tone, or clear. Wood-toned oil for decks, boardwalks and garden furniture
32
,
95
From
Outdoor · wood type
The best Osmo finishes for azobe outdoors
The best way to treat azobe outdoors is with Osmo Terras-Olie or UV-Beschermingsolie, because azobe is so dense that oil needs time to absorb, so a thin coat applied in several rounds works better than one thick coat.
Excellent
3633 reviews on Trustpilot
Fast delivery
Products

For azobe decking. Choose a matching wood tone, or clear. Wood-toned oil for decks, boardwalks and garden furniture
32
,
95
From

Clear or in a light wood tone, with UV filter. Transparent protection for cladding, frames and fences
14
,
95
From















You have viewed 3 of 17 products
Project helper
Tell us what you are treating and how it should look. We choose the product, work out how much you need and put the complete plan together.
A few questions · about two minutes · no account needed
Or start right away: What do you want to do?

In these videos you will see how to oil decking, how to clean the wood and how to restore greyed wood.



Further reading
Outdoor
Every wood type and every surface has its own page with its own advice, so everything is two clicks away.
Finish azobe outdoors with Osmo Terras-Olie on terraces, decking and jetties, and with Osmo UV-Beschermingsolie on vertical wood. Azobe is a very heavy and hard wood species that is widely used for bank revetments, bridges and terraces. Because it is so dense, an oil soaks in slowly.
For horizontal azobe, choose Terras-Olie. The pigmented versions protect against UV light and slow down greying; warm tones such as 014 Massaranduba or 016 Bankirai donker suit the dark azobe. Apply the oil in thin coats and wipe off whatever has not soaked in after a few minutes, so no tacky patches are left behind. Also take a look at terrace.
Decking or a jetty by the water quickly becomes slippery. In that case, apply Antislip Terras-Olie 430 as a third coat over two coats of Terras-Olie. Antislip cannot be applied to bare wood and on its own does not protect enough against moisture.
For azobe posts, a fence or a facade, choose UV-Beschermingsolie, in two coats. This oil is made for vertical wood and not for terraces. You can read more about posts under posts.
Let new azobe weather for at least six weeks. Clean the terrace periodically with Terrasreiniger in the mop water and brush along the grain. Never use a pressure washer, because it damages the softer parts of the wood. If the wood has turned grey anyway, first remove the grey with Power-Gel and then apply a new thin coat of Terras-Olie. The step-by-step guide is in treating azobe wood.
Looking for DIY advice or have a technical question?