
Osmo UV-Protection Oil
Clear or in a light wood tone, with UV filter: the wood keeps its own colour for longer. Transparent protection for cladding, frames and fences
14
,
95
From
Outdoor · surface
The best Osmo finishes for your outdoor facade cladding
The best way to finish your outdoor facade cladding is with Osmo UV-Beschermingsolie or Landhuisverf, because with facade cladding it's mainly the south- or west-facing side that weathers fastest, so that side is first in line for maintenance.
Excellent
3633 reviews on Trustpilot
Fast delivery
Products

Clear or in a light wood tone, with UV filter: the wood keeps its own colour for longer. Transparent protection for cladding, frames and fences
14
,
95
From

A naturally weathered grey look straight away, without waiting for years. Gives exterior wood an even silver-grey colour right away
17
,
95
From

A dense, even colour that does not peel. Also over old paint. Opaque paint for cladding, fences and sheds
44
,
95
From


Clear base coat that protects exterior wood against fungi
31
,
95
From








You have viewed 3 of 13 products
Project helper
Tell us what you are treating and how it should look. We choose the product, work out how much you need and put the complete plan together.
A few questions · about two minutes · no account needed
Or start right away: What do you want to do?

Colours
Choose your wood and see the real colour sample.
Every photo is a real colour sample. Order a sample to see the colour on your wood: every board is different.
In these videos you will see how to clean a facade without sanding, how to protect a wooden facade against UV and how to treat Douglas fir.



Further reading
Outdoor
Every wood type and every surface has its own page with its own advice, so everything is two clicks away.
Finish wooden facade cladding with Osmo UV-Beschermingsolie, Natuurlijke Olie-Beits or Landhuisverf. A facade is vertical, so rainwater runs off quickly, but it does get the full sun. The side exposed to sun and rain in particular weathers quickly and turns grey first. The right finish depends on the look you want.
UV-Beschermingsolie is made for vertical wood and protects against UV light with a factor of 12 compared with untreated wood. Apply two coats: one coat with colour followed by one coat of 420 clear, or two coats of 420. The light colours, such as 427 Douglas or 428 Red cedar, are designed to keep the wood species of the same name light. Also see Red Cedar and thermowood.
Natuurlijke Olie-Beits is a primer and top coat in one; apply two coats. For an opaque colour that keeps the wood structure visible, choose Landhuisverf. It does not peel and you can touch it up without sanding. For an even grey look, there is Vergrijzingsbeits.
Let new wood weather for at least six weeks. Also treat the back and the cut edges of the boards before fitting them. Read more in treating Swedish weatherboarding. One litre of UV-Beschermingsolie covers about 18 m² per coat, and Landhuisverf about 26 m². Rinse used cloths with water afterwards, as oily cloths can self-ignite.
Check the facade every year, starting with the side exposed to sun and rain. Clean with Terrasreiniger and never use a pressure washer. First remove the grey from weathered wood with Power-Gel. When renovating, apply no more than one thin coat.
Looking for DIY advice or have a technical question?