
Osmo Country House Paint
Opaque paint that does not peel or crack, also over old paint. Opaque paint for cladding, fences and sheds
44
,
95
From
Outdoor · surface
The best Osmo finishes for your exterior door
The best way to finish your exterior door is with Osmo UV-Beschermingsolie or Landhuisverf, because an exterior door takes the most knocks around the lock and handle, and that spot is easier to touch up with an oil than with lacquer.
Excellent
3633 reviews on Trustpilot
Fast delivery
Products

Opaque paint that does not peel or crack, also over old paint. Opaque paint for cladding, fences and sheds
44
,
95
From

Opaque white that does not crack or peel, no primer needed. White opaque paint for window frames and exterior doors
51
,
95
From




Clear base coat that protects exterior wood against fungi
31
,
95
From





You have viewed 3 of 11 products
Project helper
Tell us what you are treating and how it should look. We choose the product, work out how much you need and put the complete plan together.
A few questions · about two minutes · no account needed
Or start right away: What do you want to do?

Colours
Choose your wood and see the real colour sample.
Every photo is a real colour sample. Order a sample to see the colour on your wood: every board is different.
In these videos you will see how to paint an exterior door, how to protect the wood with UV-Beschermingsolie and which Osmo product suits which exterior wood.



Further reading
Outdoor
Every wood type and every surface has its own page with its own advice, so everything is two clicks away.
Finish a wooden exterior door with Osmo UV-Beschermingsolie or, for an opaque colour, with Osmo Landhuisverf. An exterior door is exposed to sun and rain, but also to daily knocks around the lock and the handle. An oil-based finish soaks into the wood and does not flake, so you can touch up damage locally without sanding the whole door.
UV-Beschermingsolie is made for vertical wood and protects against UV light by a factor of 12 compared with untreated wood. Apply two coats: a coloured coat followed by a coat of 420 clear, or two coats of 420. This keeps the wood grain visible and the door greys more slowly. We advise against two coloured coats.
If you want a coloured door, choose Landhuisverf. It is an opaque oil-based paint that keeps the wood structure visible. There are 21 colours, which you can also mix, so the door matches your window frame. The paint does not flake or crack. Natuurlijke Olie-Beits is a third option, for a transparent or semi-opaque colour.
Remove fittings such as the handle and the lock, or mask them off well. Also treat the bottom and top edges of the door, because that is where moisture soaks in fastest. Always test a colour with a sample first. One litre of UV-Beschermingsolie covers about 18 m² per coat, and one litre of Landhuisverf about 26 m². Rinse used cloths with water afterwards, because cloths with oil on them can self-ignite.
Touch up spots around the lock and the handle as soon as they become bare. Read more in local touch-ups with Osmo. Clean the door with Terrasreiniger and never use a pressure washer. For doors indoors, see interior door.
Looking for DIY advice or have a technical question?