
Osmo UV-Protection Oil
Choose 428 Red cedar or 431 Light red cedar, with UV filter. Transparent protection for cladding, frames and fences
14
,
95
From
Outdoor · wood type
The best Osmo finishes for Red Cedar outdoors
The best way to treat Red Cedar outdoors is with Osmo UV-Beschermingsolie, because red cedar is naturally light and soft, so an oil mainly improves the surface's wear-resistance.
Excellent
3633 reviews on Trustpilot
Fast delivery
Products

Choose 428 Red cedar or 431 Light red cedar, with UV filter. Transparent protection for cladding, frames and fences
14
,
95
From

A naturally weathered grey look straight away, without waiting for years. Gives exterior wood an even silver-grey colour right away
17
,
95
From






Clear base coat that protects exterior wood against fungi
31
,
95
From











You have viewed 3 of 19 products
Project helper
Tell us what you are treating and how it should look. We choose the product, work out how much you need and put the complete plan together.
A few questions · about two minutes · no account needed
Or start right away: What do you want to do?

In these videos you will see how to protect a wooden facade against UV, how to protect the wood with UV-Beschermingsolie and which Osmo product suits which exterior wood.



Further reading
Outdoor
Every wood type and every surface has its own page with its own advice, so everything is two clicks away.
Finish Red Cedar outdoors with Osmo UV-Beschermingsolie, for example in the colour 428 Red cedar or 431 Red Cedar licht. Red Cedar is a light, soft wood species with a warm reddish brown colour that is widely used for facade cladding. Without protection it turns grey under the influence of sun and rain.
UV-Beschermingsolie gives vertical wood 12 times more protection against UV light than untreated wood. First apply a coat of 428 Red cedar or 431 Red Cedar licht and then a coat of 420 clear. These light colours were developed to keep Red Cedar light in colour. We do not recommend two coloured coats. The oil is not suitable for horizontal surfaces. Also take a look at facade cladding.
An alternative is Natuurlijke Olie-Beits in 728 Red cedar. It is a primer and top coat in one and suitable for all exterior wood. Apply two coats. Pigmented colours protect against UV, the clear 701 does not.
Red Cedar is soft and absorbs oil quickly, especially when it is rough sawn. Apply thin coats and also treat the sawn edges and the back of the boards. Let new wood weather for at least six weeks. Read more in treating Swedish shiplap cladding and UV protection for wood. One litre of UV-Beschermingsolie covers about 18 m² per coat. Rinse used cloths with water afterwards, because cloths with oil on them can catch fire spontaneously.
The sunny and rainy sides of a facade weather fastest and need attention first. Clean with Terrasreiniger and never use a pressure washer. Remove the grey from weathered wood first with Power-Gel. For similar facade wood, also take a look at Thermowood outdoors.
Looking for DIY advice or have a technical question?