
Osmo UV-Protection Oil
Clear or in a light wood tone, with UV filter: the wood keeps its own colour for longer. Transparent protection for cladding, frames and fences
14
,
95
From
Outdoor · surface
The best Osmo finishes for your outdoor carport
The best way to finish your outdoor carport is with Osmo UV-Beschermingsolie, because a carport usually has no foundation with drainage, so the base of the posts deserves extra attention when treating it.
Excellent
3633 reviews on Trustpilot
Fast delivery
Products

Clear or in a light wood tone, with UV filter: the wood keeps its own colour for longer. Transparent protection for cladding, frames and fences
14
,
95
From

A dense, even colour that does not peel. Also over old paint. Opaque paint for cladding, fences and sheds
44
,
95
From



Clear base coat that protects exterior wood against fungi
31
,
95
From







You have viewed 3 of 12 products
Project helper
Tell us what you are treating and how it should look. We choose the product, work out how much you need and put the complete plan together.
A few questions · about two minutes · no account needed
Or start right away: What do you want to do?

Colours
Choose your wood and see the real colour sample.
Every photo is a real colour sample. Order a sample to see the colour on your wood: every board is different.
In these videos you will see how to apply Osmo Landhuisverf, how to stain the wood with Natuurlijke Olie-Beits and how to protect the wood with UV-Beschermingsolie.



Further reading
Outdoor
Every wood type and every surface has its own page with its own advice, so everything is two clicks away.
Finish a wooden carport with Osmo UV-Beschermingsolie, Natuurlijke Olie-Beits or, for an opaque colour, Landhuisverf. A carport usually stands without a foundation with drainage, so the base of the posts has to cope with a lot of moisture. In addition, the posts and fascia boards catch the full sun.
UV-Beschermingsolie is made for vertical wood and gives 12 times more protection against UV light than untreated wood. Apply two coats: one coat with colour followed by a coat of 420 clear, or two coats of 420. The oil is not suitable for horizontal beams; for those, choose Natuurlijke Olie-Beits, which is suitable for all exterior wood.
If you want the carport in the same colour as your house or shed, choose Landhuisverf. It is an opaque oil-based paint for carports, garden sheds and fences, among other things. The wood structure stays visible, the paint does not flake and you can touch it up without sanding. Also take a look at shed and canopy.
Give the bottom of the posts and the end grain extra attention. Preferably do not set posts directly in the ground but on a post base, so the wood can dry. Let impregnated wood dry out thoroughly first before you treat it. One litre of Landhuisverf or Natuurlijke Olie-Beits covers about 26 m² per coat. Rinse used cloths with water afterwards, because cloths with oil on them can catch fire spontaneously.
Check the base of the posts and the sunny side every year. Clean with Terrasreiniger and never use a pressure washer. Remove the grey from weathered wood first with Power-Gel.
Looking for DIY advice or have a technical question?