
Osmo UV-Protection Oil
Clear or in a light wood tone, with UV filter: the wood keeps its own colour for longer. Transparent protection for cladding, frames and fences
14
,
95
From
Outdoor · surface
The best Osmo finishes for your outdoor fence
The best way to finish your outdoor fence is with Osmo Landhuisverf or Natuurlijke Olie-Beits, because a fence is exposed to the weather on both sides, so the back deserves treatment too, not just the visible side.
Excellent
3633 reviews on Trustpilot
Fast delivery
Products

Clear or in a light wood tone, with UV filter: the wood keeps its own colour for longer. Transparent protection for cladding, frames and fences
14
,
95
From

A naturally weathered grey look straight away, without waiting for years. Gives exterior wood an even silver-grey colour right away
17
,
95
From

A dense, even colour that does not peel. Also over old paint. Opaque paint for cladding, fences and sheds
44
,
95
From













You have viewed 3 of 16 products
Project helper
Tell us what you are treating and how it should look. We choose the product, work out how much you need and put the complete plan together.
A few questions · about two minutes · no account needed
Or start right away: What do you want to do?

Colours
Choose your wood and see the real colour sample.
Every photo is a real colour sample. Order a sample to see the colour on your wood: every board is different.
In these videos you will see how to stain the wood with Natuurlijke Olie-Beits, how to paint the wood with an opaque finish using Landhuisverf and whether to stain or paint.



Further reading
Outdoor
Every wood type and every surface has its own page with its own advice, so everything is two clicks away.
Finish a wooden fence with Osmo Landhuisverf, Natuurlijke Olie-Beits or UV-Beschermingsolie. A fence is exposed to sun and rain on both sides, so always treat the back too, not just the side you see from the garden. Which product you choose depends on the look you want: opaque, semi-opaque or transparent.
Landhuisverf is an opaque oil-based paint for fences, sheds and carports. The wood grain remains visible and the paint does not flake or crack. You can touch it up without sanding, over the old coat. There are 21 colours, which you can also mix.
Natuurlijke Olie-Beits is a primer and top coat in one and suitable for all exterior wood; apply two coats. Pigmented colours protect against UV, the clear 701 does not. If you want to see the natural colour of the wood, UV-Beschermingsolie is an option: a coloured coat followed by a coat of 420 clear. For an even grey look, there is Vergrijzingsbeits. Whichever product you choose, treat both sides of the fence.
Let new wood weather for at least six weeks, then clean it and let it dry. Rough-sawn wood absorbs more product than planed wood. Always test a colour with a sample first. One litre of Landhuisverf or Natuurlijke Olie-Beits covers about 26 m² per coat. Rinse used cloths with water afterwards, as cloths soaked in oil can self-ignite.
Clean the fence with Terrasreiniger, which also removes green deposits, and never use a pressure washer. First remove the greying from greyed wood with Power-Gel. For your wood species, also see pine, spruce or Douglas Fir, and for the posts, see post.
Looking for DIY advice or have a technical question?