Treating a wooden floor with underfloor heating
Many people wonder if underfloor heating can be combined with a wooden floor. That is certainly possible, but it is important to choose the right type of wood and floor construction so that the heat is conducted properly and problems with the wood are prevented.

Products in this knowledge item;
Can underfloor heating also be used with wooden floors?
Yes, underfloor heating is also suitable for wooden floors. However, please note that not all wooden floors are suitable for underfloor heating.
Suitable floors are made of engineered wood planks. These planks consist of a plywood underlay and a wooden top layer. The wooden top layer is not too thick so that the heat is optimally conducted to the floor and the rest of the house. Good wood types for engineered wood planks are: oak, walnut, and teak.
Which wood is not suitable for underfloor heating?
Floors made of solid wood are not suitable for underfloor heating. The combination of solid wood and underfloor heating is guaranteed to cause problems. Due to temperature differences, the wooden planks can warp. And that is, of course, not the intention.
Treating wooden floors with Osmo
Wooden floors that are suitable for underfloor heating are also very suitable for treatment with Osmo. There are various products that can be applied. Below you can see the different products and the appearance they create.
Osmo Hardwax-Olie Original
This product is colorless and colors the wood as if it were wet. The Hardwax-Olie deepens the color of the wood, making it slightly darker. Thanks to the excellent protection provided by the Hardwax-Olie, the wooden floor will last for many years. The image on the right shows an example of Hardwax-Olie Original on oak wood.
Osmo Hardwax-Olie Farbig/Natural
These are the colored variants of the Hardwax-Olie. These products contain color pigments and color the wood evenly. The finish is transparently colored, not opaque. There are a total of eight colors in the range. Four examples of the colors are shown in the slider on the right.
Osmo Olie-Beits
The Olie-Beits creates a wash effect, perhaps familiar from white wash. In this case, the wood grain is primarily colored. This creates a very beautiful effect. The color examples show two possible options. On the left, one coat of Olie-Beits has been applied. On the right, the product has been applied twice.
Supplies for treating a floor with underfloor heating
Hardwax-Olie Original Color Samples
Hardwax-Olie Farbig color samples
Hardwax-Olie Effect Color Samples
Olie-Beits color samples
Test packages
All the above products are suitable for wooden floors heated by underfloor heating. Therefore, there is a wide choice for treating wooden floors.
We know that it can be difficult to choose a color based solely on a screen. That is why we sell small 5ml test packs. Such a sachet is sufficient for a test area of approximately 20 cm by 20 cm. With the test pack, the treatment can be tested on your own wood. It also allows you to check whether the color matches your interior.
Products from this blog
Video: Treating a wooden floor with underfloor heating
In this video you will see how to oil a wooden floor.

Houten vloer oliën: hoe zet ik een vloer in de olie?
We're happy to help
Looking for DIY advice or have a technical question?