Osmo Hardener 6632 0,15L

Osmo Verharder 6632 for Hardwax-Olie Express
Special hardener for adding to Hardwax-Olie Express. The hardener shortens the drying time to 1 to 2 hours. If you are treating wood species rich in extractives, such as teak, wenge or merbau, or smoked oak, always use Hardwax-Olie Express with the hardener; this ensures the oil dries properly. This 0.15L hardener is just enough for adding to a 2.5L can of Hardwax-Olie Express. If you want to use less Hardwax-Olie Express, add 6% of the hardener to the product. The pot life after adding the hardener is approximately 60 minutes. Therefore, do not mix more than you can apply within about 45 minutes.

Instructions for Use Osmo Verharder 6632
Open the bottle containing the hardener and add it to the Osmo Hardwax-Olie Express, emptying the bottle completely (150 ml is just enough for a 2.5L can). Stir the products thoroughly for at least 2 minutes. Apply the Osmo Hardwax-Olie Express as directed.

Hardener Drying Time
The drying time of the Hardwax-Olie in combination with the Hardener is 1 to 2 hours at the correct temperature (23°C and 50% humidity). Lower temperatures or higher humidity may increase the drying time.

Note: The 0.15L Hardener is just enough for the 2.5L Hardwax-Olie Express. If you want to use less Hardwax-Olie, add 6% of the Hardener to the product. The pot life after adding the Hardener is approximately 60 minutes. The Hardener can only be used in combination with the Hardwax-Olie Express; it cannot be used with other products.