Osmo Topoil 3061

TopOil 3061 Acacia is suitable for treating all indoor furniture surfaces. This includes wooden tables, worktops, and kitchen countertops. TopOil 3061 is an oil and wax-based product. After treatment, it ensures protection against moisture such as wine, coffee, and water. It also protects against dirt and is scratch-resistant. TopOil is easy to touch up and maintain.

TopOil 3061 is particularly suitable for wood types such as oak, beech, birch, and spruce. Do you have a tropical wood type? Then it is advisable to perform a test first to see if you like the appearance of the product.

• Based on natural, plant-based oils and waxes
• High yield, 1L = treats 24m²
• Water-repellent and wear-resistant
• Resistant to household chemicals and stains

TopOil 3061 can be applied in two ways: by buffing or rolling. Both methods are described below.

Applying with a brush or microfiber roller
1. Shake the TopOil well for 2 minutes. After opening the can, the Oil and Wax are separated.

2. Apply the first layer of TopOil 3061 thinly with a roller or brush to the new or sanded wood.

3. Mistakes made during application can be corrected on the wet surface up to 30 minutes after application. This includes roller marks or brush hairs.

4. The first layer takes approximately 8-10 hours to dry (at 23 degrees and 50% relative humidity). Drying takes longer at lower temperatures or higher humidity. Ensure good ventilation at all times. Therefore, make sure windows and doors are open. 5. Apply the second coat in the same way as in point 2 (thin). If TopOil 3061 was chosen for the first coat, it is recommended to finish the second coat with a colorless variant (3028 or 3058). This ensures that the wood is easy to touch up without creating a color difference. When choosing to apply 2 coats of 3061, the surface becomes more intense in terms of coloring.

6. The drying time for TopOil is approximately 8-10 hours.

Application with a pad or polishing cloth
1. Shake the TopOil well for 2 minutes. After opening the can, the Oil and Wax have separated.

2. Apply the first coat of TopOil to the new or sanded wood using a white pad or polishing cloth, and then buff it out with a white pad. Do this along the grain of the wood.

3. Within 20 minutes, dry-buff the TopOil with the fleece pad or polishing cloth. Also apply this along the wood grain. This ensures that not too much product is applied.

4. Mistakes made during application can be corrected on the wet surface up to 30 minutes after application. Think of roller marks or brush hairs.

5. The drying time for the first coat is approximately 8-10 hours (at 23 degrees and 50% relative humidity). Drying takes longer at lower temperatures or higher humidity. Good ventilation must be ensured at all times. Therefore, make sure windows and doors are open.

6. Apply the second, third, and even fourth coat in the same way as the first coat.

7. TopOil takes approximately 8-10 hours to dry.

If you are going to polish the surface, it is important to apply 3 to 4 coats. This is to adequately protect the surface against moisture, etc.

The Osmo Spray Cleaner can be used for the regular cleaning of treated wood. This allows you to easily and quickly clean the wooden table after eating. The product contains oil-based soaps, which ensures that the wooden surface is nourished and does not dry out.

For areas of wear in the wood, the Osmo Liquid Maintenance Wax can be used. This product is easy to apply to the wood and ensures that the wood is refreshed after treatment.