Do I need to sand between coats?

No, with Osmo you do not need to sand between coats.

Should I degrease the tabletop before treating it with Osmo?

No, we advise against this. In the worst case, it can even have negative consequences.

Can I still treat an oak table that has been oiled with Osmo?

Yes, clear Osmo products can be used over other oil-based treatments. Only do this if the tabletop is not sufficiently protected. If there is too much oil in the wood, Osmo may not adhere. If you want to stain or paint your table, we do recommend sanding it first.

Can I still treat an oak table that has been varnished with Osmo?

No, Osmo cannot be applied to an oak table that has been treated with varnish. If you want to touch up or remove stains, you will always have to sand off a varnish layer. This is where Osmo is different: it gives the protection of varnish, but with the look and easy maintenance of oil.

How can you refresh an oak table?

When you notice stains or signs of wear, it is time for maintenance. First clean the stains with Osmo Intensiefreiniger and then apply a coat of Osmo Onderhoudsolie.

How can I treat a (dark) colored oak table?

Do you have an oak table that has been treated with a dark varnish or oil? And would you like to change its look to a lighter or even darker color? Then the oak table needs to be sanded down to bare wood.Sanding down to bare wood works as follows:Start with grit 40, then 80 and finish with grit 120. After sanding, it is advisable to carefully vacuum the oak top to remove all dust. After sanding, you can treat the oak table with, for example, Osmo TopOil 3068 Natural for an untreated look.

How can I sand an oak table?

Start with grit 40, then 80 and finish with grit 120. After sanding, it is advisable to carefully vacuum the oak top to remove all dust. Then it is a good idea to wipe the table with a slightly damp cloth. Once it has been sanded and made dust-free, the oak table can be treated.

I have a scratch in my wooden table. How can I remove it?

If it is a superficial scratch, you can use Osmo Reparatie Pasta.If it is a deep scratch, it is wise to sand the top. First try sanding the entire top with grit 120 and check whether the scratch has disappeared. Then treat the top with the same product it was treated with before.

How can I clean an oak table every day?

For treated oak tables, you can use Spray-Cleaner to clean the top. This product contains oil-based soaps, which nourish the wood. Spray-Cleaner also keeps the wood from drying out, which can happen when you use water alone.

How should I protect oak outdoors?

You protect oak by treating it. After treatment with Osmo Natuurlijke Olie-Beits, the oak is protected against moisture and UV radiation, so it can stay outside all year round and turns gray much more slowly. Because the product is oil-based, it will not peel or crack. Another big advantage is that the stain can be touched up without sanding. The treatment lasts 3 to 6 years on average, depending on the weather conditions in your garden.

How do I keep my oak table from yellowing?

It is not possible to prevent an oak table from yellowing. However, by treating the table with Osmo, for example, you considerably slow down the yellowing process. If you treat the table with a pigmented product, the yellowing will not show through. So do you want no yellowing but still a natural look? Then choose a finish with an untreated look, such as TopOil 3068 Natural.

Treating an oak table

With daily use, an oak table quickly picks up stains and wear, so it needs good protection. That is why Osmo TopOil is recommended as the best choice for a durable result.

Corner of an oak table with a green chair

Products in this knowledge item;

Video: how to treat a wooden table

There are several ways to treat an oak table. This video explains three different treatment methods: you can oil, stain or paint a table. After watching this video, you will know exactly which look you want for your oak table. Would you like to know more about one or more of these treatments? Then watch the video below with a handy step-by-step plan.

Eiken tafel behandelen: zo blijft jouw tafel langer mooi

Hoe onderhoud ik een eiken tafel?

Step-by-step plan: treating an oak table

There are several ways to treat an oak table. We recommend applying three to four buffed-in coats of TopOil, or two coats with a brush or roller.

Shake

Shake the product well for 2 minutes. This makes sure the oil and wax are well mixed.

First coat: white pad

Apply the first coat of TopOil with a white pad or brush to the new or sanded table. Do this in the direction of the wood grain.

Coloring the table, but finishing it with a clear coat?

Always start with the colored coat. Only after 1 or 2 colored coats do you apply the transparent/clear coat.

Buff out the first coat: fleece pad

Within 20 minutes, buff the TopOil dry with the fleece pad or the Easy Pad cloths. Do this in the direction of the wood grain as well. This makes sure you do not apply too much product.

Fix streaks and remove hairs quickly

Mistakes made during application can be corrected on the wet surface up to 30 minutes after applying. Think of roller marks or hairs from a brush.

Let the first coat dry

The first coat takes about 8 to 10 hours to dry (at 23 °C / 73 °F and 50% relative humidity). At lower temperatures or higher humidity, drying takes longer. Always make sure there is good ventilation, so keep windows and doors open.

Apply 2 to 3 more coats

Apply the second, third and even fourth coat in the same way as the first coat.

What is the best treatment for an oak table?

The best oil for oak tables is Osmo TopOil. TopOil is a product based on oil and wax, which creates a protective surface after treatment. It protects against moisture and dirt. In addition, TopOil is easy to touch up locally and easy to maintain.

TopOil is available in seven versions: five colored and two clear. By wetting the untreated wood surface, you get an impression of the look after treatment with the clear versions, Osmo TopOil 3058 and 3028. This treatment creates a permanent wet look.

Treating an oak table naturally, without color change

Do you actually like the table just the way it is? TopOil 3068 combined with clear TopOil (silk matte or matte) lets you protect oak tables without changing their color. Because TopOil Natural contains a small amount of white pigment, the table stays natural and light after treatment. This way you can enjoy the untreated look with the benefits of an optimally protected table.

Would you rather apply a different color? TopOil Acacia, Terra or Grafiet give the oak table a subtle, darker tint. Prefer something light? Then TopOil Wit may be the right choice for you. This product gives your table a subtle white look. Would you like to deepen the color of the wood? Then choose one of the clear versions.

Cleaning and maintaining an oak table

To keep your oak table looking its best for as long as possible, it is advisable to clean it daily and maintain it regularly. For daily cleaning you can use Osmo Spray-Cleaner. This product contains a small amount of wax, which nourishes the finish of the table and makes it last longer. Spray-Cleaner is economical in use and can be used with a microfiber cloth.

When the table eventually starts to show wear, it should be treated with Osmo Vloeibare Onderhoudswas. The spray version of this product is easy to use on furniture surfaces. With Vloeibare Onderhoudswas you can refresh the table and fix stains and light scratches. In no time, your table will be as good as new!