How can I paint my door streak-free with a roller?

You prevent streaks when painting with a roller by rolling the roller almost dry at the end. Try to remove any start marks within 30 minutes by rolling over the surface again.

Can you paint a door without a primer?

Yes, when you use Osmo Decorwas Creativ, you do not need a primer!

Is it better to paint a door with a brush or a roller?

With Osmo Decorwas Creativ, both are possible. If the door consists mainly of glass or has a lot of details, it is useful to (also) use a brush. In the video, the door has a groove that is easier to treat with a brush, but the other parts are easier to treat with a roller.

Is it better to paint the door lying flat or hanging?

If the door can easily be taken out of the frame, we recommend removing it. When the door is hanging, it is harder to reach the edges. If you do paint the door while it is hanging, tape everything off carefully.

Do I need to degrease the door before painting?

No, with Osmo Decorwas Creativ that is not necessary. With many other paint brands it is, so read the instructions for use carefully before you start.

Painting a wooden interior door

Paint a wooden interior door with Osmo Decorwas Creativ for a fresh look and long-lasting protection. With good preparation, the right tools and two thin coats, you get a smooth and hard-wearing result.

What you need for this tutorial;

Is your interior ready for a breath of fresh air? Painting an interior door can work wonders! In this article, we give you a clear step-by-step plan, from preparation to finish, for painting your wooden interior door. This way you can transform your door into a real eye-catcher in your home.

Why paint your wooden interior door?

A new color or finish gives the door a fresh look and can drastically change the atmosphere and style of the room. In addition, paint provides a protective layer that protects the door against wear, stains and moisture, extending its lifespan. Painting is a cost-effective way to refresh outdated doors without having to replace them completely. In short: painting an interior door is a simple touch-up with a big result.

Video: painting an interior door

Binnendeur verven: hoe schilder ik een binnendeur?

Tips

Preparing the interior door

A good end result requires good preparation. Before you can start painting the door, it must be clean and bare. Is the door new or untreated? Then you can usually get started right away. If the door has a lot of stains or scratches, or still has residues of old paint or varnish, you will have to remove them by sanding. To sand the door down to bare wood, you will need three sanding passes. Use the grit sequence 40-80-120, so that the door becomes bare and even and the new layer of paint can adhere well. Don't forget to take safety precautions, such as wearing gloves, a dust mask and safety glasses. After sanding, make the door dust-free with Osmo Easy Pads.

Choose the right paint

Painting your wooden interior door is probably a project you take on because you want to refresh the look. But wouldn't it be nice if the door were also given extra protection at the same time? Your choice of paint plays a bigger role in this than you might think. Ordinary paints, for example latex-based or solvent-based paints, form a colored layer on the wood that does protect it, but can crack or peel due to wear.

A better option is an oil-based paint, such as Osmo Decorwas Creativ. This product offers rich color coverage and penetrates into the wood, where it bonds. It protects the wood from within against moisture, dirt and damage, so the layer will not crack or peel. In addition, the grain and structure of the wood remain visible and your door stays beautiful for much longer!

Use the right tools

When you work with Osmo, for example, we recommend using the right rollers. The Osmo microfiber roller absorbs less product and is lint-free. It is the best roller for rolling hardwax oil. If you want to buff, for example, do not use Scotch-Brite, but the Osmo white pads.

Before you start: supplies

Before you start, it is useful to gather everything you need first. Choose a paint that suits your type of wood and the look you want.

Step-by-step plan

Are you ready to tackle the interior door? We are happy to help you get started with our step-by-step plan.

Stir

Stir the can of Decorwas Creativ thoroughly with the stirring stick for about a minute. This distributes the ingredients and pigments throughout the product.

Paint the edges

Start by painting the edges and details. Use a brush for this. Apply a thin coat and work in the direction of the wood grain as much as possible.

Details

Go over the edges and details again with an almost dry brush, using light pressure. This allows you to distribute the product evenly and remove any brush start marks.

First coat

Apply a thin coat of Decorwas Creativ to the large surfaces with a roller on a roller handle. Work from top to bottom, in the direction of the wood grain.

Details

Roll over large surfaces again with an almost dry roller, using light pressure. This allows you to distribute the product evenly and remove any roller start marks.

Drying

Let the door dry for at least 24 hours. Ensure good ventilation and a temperature of around 20 degrees.

Second coat

Apply a second coat, see steps 2 to 6.

Maintaining an interior door

Now that the door has been completely refreshed, you naturally want to keep it looking good for as long as possible. That is why it is important to maintain the door properly. You can clean the door with a regular cleaning spray. However, a regular cleaning spray can cause the finish to slowly dry out and break down. Do you want to protect the door for as long as possible? Then it is advisable to use Osmo Spray-Cleaner. This cleaning spray contains a small amount of wax, which nourishes the finish of the door so that it does not break down. As a result, the finish lasts longer and the door stays beautiful for longer.