Name: Osmo Hardwax-Olie Anti-Slip 3089 Clear satin matt R11
Brand: Osmo
SKU: 10400095
Price: 50.95 EUR
Availability: InStock
Rating: 4.5 (4 reviews)

Question 1

What kind of look does the Osmo Hardwax-Olie Anti-Slip treatment create?

Accepted Answer

We call this a wet-look effect. The product emphasizes the wood's color. After treatment, it darkens, giving the wood a wet-looking appearance. You can test this yourself with a little water.

Question 2

What color is the Hardwax-Olie Anti-Slip?

Accepted Answer

3088 (semi-matt, R9) and 3089 (satin, R11) are colorless. 3094 is opaque black with a matte finish (R9).

Question 3

What's the difference between 3088 and 3089?

Accepted Answer

The 3088 doesn't contain granules, while the 3089 does. Both versions offer a non-slip surface after treatment.

Question 4

How should I prepare the wood?

Accepted Answer

Before applying the Hardwax-Olie, it's important that the wood is bare-sanded or untreated. Remove all dust with a dry cloth or vacuum cleaner. To bare-sand the wood, you need to sand the floor with three different grit sizes: first with 40 grit, then with 80 grit, and finish with 120 grit. If you're only renovating, sanding with 120 grit is sufficient. Apply a maximum of one coat to the wood.

Question 5

Can I apply more than two coats?

Accepted Answer

No, if you apply a third coat, there's a good chance it won't adhere.

Question 6

How should I apply the Hardwax-Olie?

Accepted Answer

You can use the Osmo Roller or an Osmo brush. A brush is useful for the corners and edges of the surface. A roller is best for larger areas. Apply the product thinly to the wood and roll it out thoroughly to prevent streaks. Read the instructions for the exact application steps.

Question 7

How much Hardwax-Olie should I apply?

Accepted Answer

The product has a coverage of 24m² per liter. You can calculate how much Hardwax-Olie you need with the handy usage meter.

Question 8

In which direction of the wood should I apply the product?

Accepted Answer

Along the length of the plank, along the grain. Apply thinly and roll out the Osmo thoroughly.

Question 9

What is the drying time for Hardwax-Olie?

Accepted Answer

8 to 12 hours at approximately 20°C and 50% relative humidity. At lower temperatures or higher humidity, drying takes longer. The product must dry naturally. Therefore, ensure good ventilation at all times, so make sure to open windows and doors after treatment.

Question 10

On which surfaces can Hardwax-Olie be applied?

Accepted Answer

Hardwax-Olie Anti-Slip is intended for indoor wooden floors and stairs where extra slip resistance is needed, such as stairs, stages and dance floors. It is also suitable for OSB and cork floors. For furniture, tables and worktops we recommend Osmo TopOil. For tropical woods, Osmo offers Blanke Was. This is a clear oil specifically formulated for tropical woods.

Question 11

How do I maintain a treated floor?

Accepted Answer

A surface treated with Hardwax-Olie also requires maintenance. It can be cleaned with Osmo Wisch-Fix, which contains a small amount of wax, which also prevents the floor from drying out. Vloeibare Onderhoudswas can be used on worn areas in high-traffic areas. With these products, you can enjoy your treated wood for longer.

Question 12

Can Hardwax-Olie be applied over another brand?

Accepted Answer

If it's an oil product, this is usually possible. A maximum of one coat can be applied; a second coat may cause adhesion. This should always be tested first. If the surface is already treated with a lacquer or wax, it should be sanded down before applying Hardwax-Olie.

Question 13

Can Hardwax-Olie be applied to all types of wood?

Accepted Answer

This product is suitable for most European wood species, such as oak, pine, spruce, beech and ash, and also for pitch pine. For extractive-rich hardwoods such as wenge, merbau or jatoba we recommend Osmo Blanke Was.

Question 14

I want to renovate my wood, which product is suitable?

Accepted Answer

If you want to apply a new coat to the wood and it has already been treated, you have two options. 1. Clean with Osmo Intensiefreiniger and then treat with Osmo Onderhoudsolie. The maintenance oil is a diluted version of Hardwax-Olie and adheres well to previously treated wood. 2. Sand with 120 grit. Then apply a new thin coat with a microfiber roller or brush/floor brush. Both options should always be tested first in an inconspicuous area.

Question 15

Can I also treat MDF, veneer, and OSB?

Accepted Answer

Yes, all these surfaces can be treated with Hardwax-Olie.

Question 16

Can I also touch up spots?

Accepted Answer

Yes, for localized scratches or worn areas, you can tape off the affected plank and sand it with 120 grit. Then check if the plank is even. If so, you can apply a new coat of Hardwax-Olie Anti-Slip. If the plank requires a coarser sanding, you can do so first with 40 grit, then 80 grit, and finish with 120 grit. Then you can apply two coats of Hardwax-Olie Anti-Slip.

Question 17

How do I clean brushes and rollers?

Accepted Answer

You can do this with Osmo Kwastenreiniger. Place the Kwastenreiniger in a small container or cup. Let the brushes soak for a few hours and then rinse the tools with water. Dry the tools and store them in a dry place. Cleaning brushes and other application tools with turpentine is also an option. Place the turpentine in a small container and let the brushes soak for a few hours. Then rinse the brushes and dry them with a clean cloth.

Question 18

When can floors treated with Osmo Hardwax-Olie be accessed again, and when can I put my furniture back in the room?

Accepted Answer

Newly treated surfaces can be accessed once the Hardwax-Olie has dried for approximately 24 hours. Furniture with legs that allow air to circulate underneath can also be put back after approximately 24 hours. Items that do not allow air to circulate underneath, such as rugs, should not be placed on the floor for two weeks until the Hardwax-Olie has fully cured.

Osmo Hardwax-Olie Anti-Slip 3089 Clear satin matt R11

Frequently bought together

Osmo Rollerset 25cm

Osmo Kwast

Osmo Wisch-Fix 8016

Osmo Vloeibare Onderhoudswas

Description

Colors

Application

Application instructions for the Osmo Hardwax-Olie Anti-Slip

Specifications

Frequently Asked Questions

This is it

Frequently bought together

Osmo Rollerset 25cm

Osmo Kwast

Osmo Wisch-Fix 8016

Osmo Vloeibare Onderhoudswas

Want to know more about our Hardwax-Olie Anti-Slip?