Osmo Hardwax-Olie Rapid 3262 Clear matt

Osmo Hardwax-Olie Rapid 3232 semi-matt and 3262 matt provide colourless protection for wooden floors and stairs, as well as walls and ceilings. Suitable for most wood species, such as oak, pine, spruce, beech, ash and maple. Not suitable for walnut or for dark hardwoods rich in extractives such as wenge, merbau and jatoba: for these we recommend Osmo Blanke Was. This finish dries faster than Hardwax-Olie Original Colorless. Rapid is an oil- and wax-based product, which provides a protective surface after treatment. The product uses a two-layer system: the first layer is fully absorbed into the wood, while the second layer hardens in the upper pores of the wood. The surface appearance is very natural, as the product emphasizes the color of the wood. By wetting the untreated wood, you can get an impression of the appearance after treatment with Osmo Hardwax-Olie Rapid 3232 and 3262; a permanent wet look is created after treatment. This applies when using only Hardwax-Olie Rapid. Applying a color first and then a coat of Rapid to the wood won't create a wet-look effect. Thanks to the short drying time of approximately 4 to 6 hours per coat, you can apply the two coats in quick succession.

There is also a white version of Hardwax-Olie Rapid, 3240. This version has the same color as Hardwax-Olie Farbig 3040, but dries faster.

Hardwax-Olie Rapid Fast-Drying
Hardwax-Olie Rapid is the fast-drying version of Hardwax-Olie Original and should therefore be applied in exactly the same way. In two days, with two coats, you can treat the wooden surface with Osmo Rapid, making it completely ready for use. Each coat of Hardwax-Olie Rapid has a drying time of 4 to 6 hours.

Read here how to maintain a floor treated with Hardwax-Olie Rapid. Proper maintenance of a wooden floor extends the life of the treatment.

1L is sufficient for approximately 24 m² with one coat.

Osmo Tips & Tricks. Watch the video about preventing streaks; this ensures an even finish on the wood.

Note: For surfaces already treated with Osmo or another brand or product, always perform a test first. For renovations, it is always recommended to apply a maximum of one coat. If more than one coat is applied, there is a chance that the second coat will not adhere, making it easy to scratch off. You can find instructions on how to perform a test in the frequently asked questions.

Note: Cloths saturated with the liquid product should be washed immediately after use or stored airtight in a metal container (risk of spontaneous combustion). Once dry, the cloths can be disposed of in the trash.