
Osmo Door Oil 1L
Made for interior doors and frames. Clear, or 3033 Raw for an untreated look. Dirt and water-repellent oil for interior wooden doors
55
,
95
Indoor · surface
The best Osmo finishes for your indoor window frame
The best way to finish your indoor window frame is with Osmo Houtbeschermer as a base coat and Decorwas Transparant, because an interior window frame is exposed to sunlight through the window, and a colourfast oil prevents one side from discolouring faster than the other.
Excellent
3633 reviews on Trustpilot
Fast delivery
Products

Made for interior doors and frames. Clear, or 3033 Raw for an untreated look. Dirt and water-repellent oil for interior wooden doors
55
,
95

An even, opaque colour for your frame. Opaque colour oil for furniture, doors and walls indoors
21
,
95
From




You have viewed 3 of 6 products
Project helper
Tell us what you are treating and how it should look. We choose the product, work out how much you need and put the complete plan together.
A few questions · about two minutes · no account needed
Or start right away: What state is your door in?

Colours
Choose your wood and see the real colour sample.
Every photo is a real colour sample. Order a sample to see the colour on your wood: every board is different.
In these videos you will see how to paint an interior window frame and which Osmo product suits your wood.


Further reading
Indoor
Every wood type and every surface has its own page with its own advice, so everything is two clicks away.
Treat a wooden frame indoors with Osmo Houtbeschermer as a base coat and finish it with Osmo Decorwas Transparant. An oil soaks into the wood and lets it breathe, so the finish will not flake. You can touch up damage locally, without sanding or painting the whole frame.
For the inside of a window frame, first use Houtbeschermer as a base coat and then Decorwas Transparant. The surface becomes water-repellent, which is useful with condensation on the sill. For a door frame next to an interior door, use the same system.
Wood slowly changes colour under the influence of daylight. A clear oil lets this happen evenly, while a coloured product helps to limit discolouration. The pigment absorbs part of the light. If you want to keep light wood species light, choose Decorwas Transparant in a light shade, such as 3111 Wit. Always test on an inconspicuous spot first.
Lightly sand the frame and make it dust-free. Mask off the glass and wall with tape. Apply the oil thinly with a small brush, in the direction of the grain, and buff off the excess after a few minutes. This gives an even result without drips in the corners. Only remove the tape once the oil is dry.
Remove dust and fingerprints with the Spray-Cleaner. Refresh dull spots with Vloeibare Onderhoudswas. Wipe away condensation on the sill regularly, so the finish there stays looking good for longest.
Looking for DIY advice or have a technical question?