
Osmo Hardwax-Oil Original
Protects against dirt and stains. The wood turns slightly darker and warmer. Hard-wearing clear oil for wooden floors and stairs
24
,
95
From
Indoor · surface
The best Osmo finishes for your indoor wall or ceiling
The best way to finish your indoor wall or ceiling is with Osmo Hardwax-Olie Original or Decorwas, because a wall or ceiling sees little mechanical wear, so what matters most is that the oil doesn't leave a shiny, film-forming layer.
Excellent
3633 reviews on Trustpilot
Fast delivery
Products

Protects against dirt and stains. The wood turns slightly darker and warmer. Hard-wearing clear oil for wooden floors and stairs
24
,
95
From

Clear UV protection that greatly reduces the yellowing of wood. Clear wax that protects light wood indoors from yellowing
46
,
95
From















You have viewed 3 of 17 products
Project helper
Tell us what you are treating and how it should look. We choose the product, work out how much you need and put the complete plan together.
A few questions · about two minutes · no account needed
Or start right away: What state is the wood in?

Colours
Choose your wood and see the real colour sample.
Every photo is a real colour sample. Order a sample to see the colour on your wood: every board is different.
In these videos you will see which Osmo product suits your wood and which looks you can choose indoors.


Further reading
Indoor
Every wood type and every surface has its own page with its own advice, so everything is two clicks away.
Finish a wooden wall, wall panelling or ceiling with Osmo Hardwax-Olie Original or Osmo Decorwas Transparant. A wall or ceiling sees little wear. So what matters most is that the wood stays attractive, does not yellow and does not get a shiny layer.
For a clear finish, use Hardwax-Olie Original, preferably in 3032 satin matt or 3062 matt. If you want colour, buff one coat of Decorwas Transparant onto the wood. The colour mainly soaks into the grain, so the pattern of the wood stays visible. On a wall that does not come into contact with moisture, one coat of Decorwas can be enough.
For a light, Scandinavian look, choose Decorwas 3111 Wit. On pine, spruce or fir, the white tint also counteracts the yellowing of the wood. Always test a colour first on a loose piece of the same board. Read more in treating wooden wall panels.
If the panelling is in a kitchen or bathroom, the wood does have to cope with steam and splashes. There, first treat the bare wood with Houtbeschermer as a primer against mould and finish with Hardwax-Olie Original, also over a coat of Decorwas. With sheet material, treat the edges well too. For sheet material, see OSB indoors.
Work in thin coats, board by board or panel by panel along the full length, to avoid lap marks. On the ceiling, use a roller on an extension pole. Because a wall hardly wears, it needs almost no maintenance: dusting with a dry cloth is usually enough. For fir and spruce, also see spruce indoors.
Looking for DIY advice or have a technical question?