
Osmo Terras-Olie
Osmo Decking Oil is a product based on oils and waxes that creates a protected surface after treatment. The surface is resistant to water, dirt and the sun.
32
,
95
From
The best Osmo finishes for pine outdoors
The best way to treat pine outdoors is with Osmo Landhuisverf or UV-Beschermingsolie, because pressure-treated pine remains sensitive to moisture at cut edges, and that's exactly where a protective layer deserves extra attention.


Osmo Decking Oil is a product based on oils and waxes that creates a protected surface after treatment. The surface is resistant to water, dirt and the sun.
32
,
95
From

Silk-matt, colourless protection based on natural oils for exterior wood.
14
,
95
From

Osmo Natural Oil Stain is an oil and wax-based product that creates a protective surface after treatment. The surface is then resistant to water, dirt, and sunlight.
14
,
95
From

Osmo Country Colour is a product based on oils and waxes that creates a protected surface after treatment. The surface is resistant to water and dirt.
44
,
95
From


Highly effective concentrate for cleaning untreated or oiled wood. Quick and easy to use.
17
,
95
From

Thick specialist cleaner developed to clean and refresh greyed exterior wood.
12
,
95
From

Osmo Endgrain Wax is ideal for treating the end grains of various outdoor wooden surfaces. By treating the end grains of your wood, you minimize swelling and shrinkage. The treatment also provides excellent protection. Osmo Endgrain Wax can be used on both soft and hard wood types, such as Bankirai, Teak, Massaranduba, Garapa, Pine, Spruce, Douglas Fir, Larch, and Cedar.
36
,
95

Extremely weather-resistant and UV-protective wood finish for treating exterior wood. Osmo Opaque Stain is a breathable and water-repellent product. Once dry, the stain is safe for humans, animals, and plants, and is also suitable for treating children's toys such as playground equipment. Osmo Opaque Stain is suitable for treating almost all exterior wood, such as facades, fences, gates, garden sheds, garden furniture, and carports. The Opaque Stain is not suitable for patios and decking. Osmo Opaque Stain dries after just 3 to 4 hours. This means the wood can be treated with two coats in one day.
34
,
95
From
You have viewed 3 of 9 products
Finish pine outdoors with Osmo Landhuisverf, Natuurlijke Olie-Beits or UV-Beschermingsolie. Pine used outdoors is usually preservative-treated, but it remains sensitive to moisture at sawn edges and damaged areas. A good finish protects the wood and gives it the colour you want.
Landhuisverf is an opaque oil-based paint for exterior wood such as fences, sheds, window frames and carports. The wood structure stays visible and the paint does not flake. You can touch it up without sanding, straight over the old coat. Also see fence and shed.
Natuurlijke Olie-Beits is a primer and top coat in one and suitable for all exterior wood, for example in 700 Grenen; apply two coats. For vertical wood you can also use UV-Beschermingsolie: a coloured coat followed by a coat of 420 clear. Pigmented colours protect against UV, clear versions do not, or do so less.
Treat sawn edges and end grain extra well, because that is where moisture soaks in fastest. Let new wood weather for at least six weeks, then clean it. Rough-sawn wood absorbs more product than planed wood. The step-by-step guide is in treating pine for outdoor use. One litre of Landhuisverf or Natuurlijke Olie-Beits covers about 26 m² per coat. Rinse used cloths with water afterwards, because cloths with oil on them can self-ignite.
Clean a fence with Terrasreiniger and never use a pressure washer. First remove the grey from weathered wood with Power-Gel. For pine indoors, see pine indoors, and for a comparable wood species, see spruce outdoors. On previously treated wood, always test on an inconspicuous spot first.
Are you looking for a tutorial or do you have a technical question?
DIY help needed?
find a step-by-step guide for your project in our tutorial overview