
Osmo UV-Beschermingsolie
Silk-matt, colourless protection based on natural oils for exterior wood.
14
,
95
From
The best Osmo finishes for your outdoor shutters
The best way to finish your outdoor shutters is with Osmo Landhuisverf or UV-Beschermingsolie, because when open, shutters often lie flat in the sun, so the outer face weathers faster than the inner face and deserves separate attention.


Silk-matt, colourless protection based on natural oils for exterior wood.
14
,
95
From

Osmo Natural Oil Stain is an oil and wax-based product that creates a protective surface after treatment. The surface is then resistant to water, dirt, and sunlight.
14
,
95
From

Osmo Country Colour is a product based on oils and waxes that creates a protected surface after treatment. The surface is resistant to water and dirt.
44
,
95
From

Osmo Wood Impregnator WR Aqua 4019 is a colorless, ready-to-use, water-based wood impregnation. Osmo Wood Impregnator is suitable for protecting wood in outdoor areas that are not in direct contact with the ground. The impregnation protects against pests such as mold and wood rot, and uniquely, Osmo Wood Impregnator WR Aqua 4019 reduces wood swelling and shrinkage. This product produces almost no smoke during application and is odorless when dry.
31
,
95
From

Osmo Transparent Wood Finish 000 is a colorless, semi-gloss wood treatment based on a natural oil base for exterior wood. The Transparent Wood Finish is porous, allowing the wood to breathe and reducing swelling and shrinkage. It is water-repellent and will not crack, chip, or peel. The Transparent Wood Finish penetrates deeply into the wood, smoothing the surface even with a single coat. A primer is not required.
28
,
95
From

The window and door finish that won't crack, peel, or flake. This opaque, semi-gloss, open-pore wood finish offers high performance and unparalleled durability. Osmo Opaque Wood Paint is UV-resistant, slowing the graying process. This makes it the ideal professional paint for windows, doors, and shutters. It can be applied without sanding, and no primer is required.
51
,
95
From

Extremely weather-resistant and UV-protective wood finish for treating exterior wood. Osmo Opaque Stain is a breathable and water-repellent product. Once dry, the stain is safe for humans, animals, and plants, and is also suitable for treating children's toys such as playground equipment. Osmo Opaque Stain is suitable for treating almost all exterior wood, such as facades, fences, gates, garden sheds, garden furniture, and carports. The Opaque Stain is not suitable for patios and decking. Osmo Opaque Stain dries after just 3 to 4 hours. This means the wood can be treated with two coats in one day.
34
,
95
From
You have viewed 3 of 7 products
Finish wooden shutters with Osmo Landhuisverf or Osmo UV-Beschermingsolie. When open, shutters often lie flat against the facade in full sun, and when closed they catch the rain. As a result, the outside weathers faster than the inside. Even so, always treat both sides and all edges, so the wood moves evenly.
Shutters often have a colour that matches the window frames and the facade. Landhuisverf is an opaque oil-based paint that leaves the wood structure visible. There are 21 colours, which you can also mix. The paint does not flake or crack, and you can touch it up without sanding, over the old coat. Also take a look at window frames.
If you want the wood grain to show, choose UV-Beschermingsolie. It gives vertical wood 12 times more protection against UV light than untreated wood. Apply two coats: one coat with colour followed by a coat of 420 clear, or two coats of 420. A pigmented colour protects better against greying than clear.
Preferably take the shutters off their hinges and lay them on trestles, so you can reach everything properly, including the bottom edge. Make sure the wood is clean and dry, and always test a colour with a sample first. One litre of Landhuisverf covers about 26 m² per coat, and one litre of UV-Beschermingsolie about 18 m². Rinse used cloths with water afterwards, because cloths with oil on them can catch fire spontaneously.
Clean shutters with Terrasreiniger and never use a pressure washer. Touch up the sunny side and the bottom edge first. For similar exterior wood, also take a look at shed and facade cladding.
Are you looking for a tutorial or do you have a technical question?
DIY help needed?
find a step-by-step guide for your project in our tutorial overview