
Osmo UV-Beschermingsolie
Silk-matt, colourless protection based on natural oils for exterior wood.
14
,
95
From
The best Osmo finishes for your outdoor facade cladding
The best way to finish your outdoor facade cladding is with Osmo UV-Beschermingsolie or Landhuisverf, because with facade cladding it's mainly the south- or west-facing side that weathers fastest, so that side is first in line for maintenance.


Silk-matt, colourless protection based on natural oils for exterior wood.
14
,
95
From

Osmo Natural Oil Stain is an oil and wax-based product that creates a protective surface after treatment. The surface is then resistant to water, dirt, and sunlight.
14
,
95
From

Osmo Country Colour is a product based on oils and waxes that creates a protected surface after treatment. The surface is resistant to water and dirt.
44
,
95
From


The colourless Maintenance Oil for WPC and BPC penetrates into the surface and does not build up a layer on top. Through impregnation, the surface becomes water-repellent and resistant to dirt and stains.
44
,
95

The Osmo WPC and BPC Cleaner (Composite Cleaner) is ideal for periodic cleaning of polymer composite surfaces. The Composite Cleaner has a coverage of 10 to 50 m². Use an Osmo Patio Brush with handle or the Osmo Patio and Floor Cleaner to clean the surface. Highly effective, intensive cleaner for removing organic and inorganic contaminants outdoors. Ideal for intensive cleaning of WPC decking, fences, and all other wood-plastic composites outdoors.
27
,
95
From


Highly effective concentrate for cleaning untreated or oiled wood. Quick and easy to use.
17
,
95
From

Thick specialist cleaner developed to clean and refresh greyed exterior wood.
12
,
95
From

Osmo Endgrain Wax is ideal for treating the end grains of various outdoor wooden surfaces. By treating the end grains of your wood, you minimize swelling and shrinkage. The treatment also provides excellent protection. Osmo Endgrain Wax can be used on both soft and hard wood types, such as Bankirai, Teak, Massaranduba, Garapa, Pine, Spruce, Douglas Fir, Larch, and Cedar.
36
,
95
You have viewed 3 of 10 products
Finish wooden facade cladding with Osmo UV-Beschermingsolie, Natuurlijke Olie-Beits or Landhuisverf. A facade is vertical, so rainwater runs off quickly, but it does get the full sun. The side exposed to sun and rain in particular weathers quickly and turns grey first. The right finish depends on the look you want.
UV-Beschermingsolie is made for vertical wood and protects against UV light with a factor of 12 compared with untreated wood. Apply two coats: one coat with colour followed by one coat of 420 clear, or two coats of 420. The light colours, such as 427 Douglas or 428 Red cedar, are designed to keep the wood species of the same name light. Also see Red Cedar and thermowood.
Natuurlijke Olie-Beits is a primer and top coat in one; apply two coats. For an opaque colour that keeps the wood structure visible, choose Landhuisverf. It does not peel and you can touch it up without sanding. For an even grey look, there is Vergrijzingsbeits.
Let new wood weather for at least six weeks. Also treat the back and the cut edges of the boards before fitting them. Read more in treating Swedish weatherboarding. One litre of UV-Beschermingsolie covers about 18 m² per coat, and Landhuisverf about 26 m². Rinse used cloths with water afterwards, as oily cloths can self-ignite.
Check the facade every year, starting with the side exposed to sun and rain. Clean with Terrasreiniger and never use a pressure washer. First remove the grey from weathered wood with Power-Gel. When renovating, apply no more than one thin coat.
Are you looking for a tutorial or do you have a technical question?
DIY help needed?
find a step-by-step guide for your project in our tutorial overview